Process performance
Selecting filter cloth for a centrifuge
Filter cloth is a process component, not just a spare part.
Read technical guideCategoryTop-Discharge & Extraction
HUADA · PSD
Bag Lifting Top Discharge Centrifuge
A batch basket centrifuge with mechanical bag lifting to transfer separated cake out of the basket for unloading.
Vertical filtration
What this machine is designed to do.
Filterable suspensions where lifting the product-filled bag is preferable to manual digging or scraper discharge.
- Mechanical lifting reduces direct manual cake handling.
- Filter-cloth replacement is accessible.
- Batch washing accommodates different campaign requirements.
- A specified hoist can integrate unloading into the plant layout.
Working principle
Filtration, washing and dry spinning take place inside the basket. Once the machine is stopped and the access sequence is complete, the designated lifting system removes the filter bag and associated lifting arrangement. Cake is unloaded at the receiving area before the bag is returned for the next cycle.
Selection boundaries
Lifting clearance, bag integrity, safe working load and the receiving station are part of the system. Machine footprint alone does not describe the required operating area. Product containment during transfer must be assessed separately.
01
Feed
Form a distributed cake.
02
Filter
Remove mother liquor.
03
Wash
Displace soluble impurities.
04
Spin
Reduce retained liquid.
05
Discharge
Transfer the solid product.
06
Regenerate
Prepare the filtering surface.
Conceptual batch-filtration sequence. Stage order, speeds and timing depend on the selected machine and approved recipe.
Technical specifications
Catalogue reference data. Final configuration, capacity and performance depend on the material and agreed operating conditions.
Download catalogue · PSD · EN
HUADA catalogue · PDF 51 · Catalogue reference data. Final configuration, capacity and performance depend on the material and agreed operating conditions.
HUADA · PSD
Configure for your process
Hoist and lifting gear; bag construction; loading and discharge route; wash and cleaning systems; material finish; guarding.
Discuss your process
Questions before quotation
What determines the final capacity?
Feed properties, the required product quality and the complete operating cycle or continuous operating window. Catalogue dimensions and rated values do not replace a representative material test.
Can this be supplied as a complete system?
The scope can be discussed around feed handling, separation, washing where applicable, discharge and controls. The quotation should identify every included item and each buyer-supplied interface.
Are special materials and safety configurations standard?
They must be specified for the material, site and selected model. Ask for the exact contact materials, seals, electrical requirements and supporting documents in the proposal.
CONFIRM THE PROCESS FIT
What should the trial establish?
Agree the feed envelope, product target and complete equipment boundary. Compare alternatives if the material does not suit this principle.