PLD
Bag-Pulling Bottom Discharge Centrifuge
Automated batch filtration with scraper discharge and a bag-pulling step to release residual cake from the filter cloth.
View detailsAPPLICATION ENGINEERING
Battery materials separation
Define individual impurity limits, particle characteristics and contamination controls. Washing and cake release should be demonstrated with representative material, alongside recovery and cycle time.
Define the duty before the model.
- Chemistry and impurity limits
- Particle morphology and breakage limits
- Washing and yield objectives
- Contact-material and cleanliness requirements
Equipment families to evaluate
GKH
Siphon Peeler Centrifuge
A horizontal peeler centrifuge with a siphon liquid-removal arrangement that adds control over the filtration driving force.
View details
GKF
Pharmaceutical Peeler Centrifuge
A horizontal peeler platform with through-wall installation and cleaning-focused design options for pharmaceutical processing.
View detailsShortlisting depends on representative material data and testing. Inclusion here does not guarantee suitability for every material in this industry.
The engineering conversation
Where washing removes soluble species from a filter cake, evaluate residual impurity against wash volume, contact conditions and product loss. Fine or compressible solids may show slow filtration or retained liquid. Product-contact materials, wear debris and seal arrangements should be reviewed in relation to the contamination limits. Particle-size preservation must be assessed through the complete handling route.
PLD, horizontal peeler and other families should be shortlisted from representative filtration tests. Request repeatability across several cycles and a documented wash balance. The final proposal should distinguish proven process results from design options still requiring confirmation.
Centrifuge selection for battery precursor materials